How It Works

It is so much more than just paint! Exterior Wallcoat coatings will protect your home from the weather and will remain looking beautiful for over 15 years, GUARANTEED!

Up to 35% of the heat from your home escapes through the walls. The Exterior Wallcoat Protection System, when applied, is up to 20 times thicker than paint and contains compounds that act as insulation, dramatically reducing heat loss.

What's in the Exterior Wallcoat Protection System?

Polyester

The heart of the coating formula. The polyester is a specially formulated base which will always remain flexible and water repellant. Unlike ordinary paint alone which contains oils that dry by evaporation and shrinkage the polyester dries chemically without losing weight or body.

Perlite

A glassy substance of volcanic origin. When crushed into small grains and heated at 1800°F, perlite pops... actually blows into millions of glass bubbles, each bubble containing air cells. Each of the bubbles acts as a miniature vacuum bottle which resists the passage of heat, cold and sound.

Polybutene

Stronger than steel, lighter than cotton, flexible as silk, polybutene helps bind all the other solids to bridge cracks and hide defects. Withstands up to 1000°F, will not burn, will reflect all climatic extremes indefinitely.

Titanium

The wonder metal - light, strong, corrosion resistant. One of the major ingredients in the coating pigment. Titanium has tremendous hiding power, completely concealing the previous colour. The 'whiter than white' pigment is one of the most stable substances and will not oxidise!

Resin

A clear plastic waterproofing agent which ensures no water gets through the coating to damage your walls.

Independent Laboratory Tests:

Water Vapour Permeability
[TEST BS7406 1991]
Although the product will prevent penetrating damp it does allow the substrate to breathe.
Independent testing gave a water vapour resistance of 9.2MNsg

Liquid Water Permeability
The results show that the samples of coating are virtually impermeable towards liquid water.
98mph wind-driven rain test.

Chemical Resistance
The coating showed adequate resistance to alkali solution and alkali substrates compatible substrate surfaces.
Samples were immersed in a 1% sodium carbonate solution for 14 days and allowed to dry, an impact test was then carried out.